Pulsar questions, answered
Where to use it, how often, skin tones and care, written from the Pulsar user manual.
- ScheduleEvery 2 weeks, then monthly
- Best forLighter skin, darker hair
- Warranty1 year
Using it
How do you use the Pulsar in SR mode?
Switch from HR (hair removal) to SR (skin rejuvenation), then treat clean, dry skin on the lowest comfortable level, pressing the window flat against the skin. The manual suggests SR mode about once a week. Treat each area only once per session, and never near the eyes or eyebrows.
Source: Pulsar user manual. Reviewed November 2026
Where on the body can I use the Pulsar?
On areas such as the legs, arms and underarms. Never use it around the eyes or eyebrows, on the lips, nipples or areolas, the genital area, inside the nose or ears, or over implants, injection ports or piercings. Men must not use it on the face or neck, including the beard area.
Source: Pulsar user manual. Reviewed November 2026
How often do you use the Pulsar?
Follow the three phases in the manual: once every two weeks to start, then once a month, then only when you notice regrowth. Treat each area once per session, and never repeat a flash on the same spot.
Source: Pulsar user manual. Reviewed November 2026
Should I shave before using the Pulsar?
Yes. The skin should be hair-free, clean, dry and free of oils, as the manual asks. Avoid waxing or plucking during your course, because IPL works on the hair root.
Source: Pulsar user manual; EvenSkyn guidance. Reviewed November 2026
Safety
Can I use the Pulsar if I have tattoos or moles?
Never flash over a tattoo, permanent makeup, a mole, a birthmark or a dark spot: the pigment absorbs the light and can heat, blister or change colour. Treat around them instead, and if you're unsure about a spot, ask a dermatologist first.
Source: EvenSkyn guidance. Reviewed November 2026
Is the Pulsar suitable for dark skin tones?
No. Darker skin holds more of the pigment that IPL targets, so the light can heat the skin itself, with a risk of burns and lasting colour change. The Pulsar is for lighter skin tones. Don't use it on tanned skin; wait until the tan has faded.
Source: Pulsar user manual; EvenSkyn guidance. Reviewed November 2026
What side effects can the Pulsar cause?
Warmth and mild redness that fade within hours are common. Treatment should never be painful: if it is, lower the level. If redness or pain lasts, stop, moisturise and, if it lasts beyond two days, see a dermatologist before using it again on the lowest setting.
Source: Pulsar user manual. Reviewed November 2026
Can the Pulsar cause ingrown hairs or bumps?
IPL isn't a usual cause of ingrown hairs. In the weeks after a session, treated hairs shed from the follicle, which can look like small red bumps for a while. Shaving is the most common cause of ingrown hairs, so shave in the direction of growth with a clean, sharp blade and exfoliate gently between sessions. If bumps are painful, spreading or don't settle, stop and see a dermatologist.
Source: EvenSkyn support team. Reviewed November 2026
Can men use the Pulsar?
Yes, on the body. The manual says men must not use it on the face or neck, including all beard areas, or on the genital area. Thick, coarse hair can need more treatments.
Source: Pulsar user manual. Reviewed November 2026
Do I need goggles with the Pulsar?
The Pulsar only flashes when its window sits flat against the skin, and its manual says goggles aren't needed. Never look at the flash, never use it near your eyes or eyebrows, and use it in a well-lit room so the light is less glaring.
Source: Pulsar user manual. Reviewed November 2026
Care and troubleshooting
Why isn't the Pulsar flashing?
Its sensor fires only when the window sits completely flat against the skin. Press it flat, with no angle or gap, on clean, dry, shaved skin, and press the flash button. If it still won't flash, contact support@evenskyn.com.
Source: Pulsar user manual. Reviewed November 2026
How do I clean and store the Pulsar?
It isn't washable: never put it in water or under a tap. Let the light window cool before touching it, keep the air vents clear, and store it somewhere dry and dust-free, out of direct sun. Use it only between 15 and 35°C.
Source: Pulsar user manual. Reviewed November 2026
Specs and science
How does IPL hair removal work?
IPL sends broad-spectrum light into the skin, where the dark pigment in the hair absorbs it and heats the hair follicle, which can slow regrowth over a course of treatments. It works best on light skin with darker hair. Results vary, and some regrowth is normal.
Source: Pulsar user manual; EvenSkyn guidance. Reviewed November 2026
General information from the user manual and our policies, not medical advice. If you have a medical condition, take medication or are unsure whether this device suits you, ask your doctor before use. Where this page and a policy differ, the policy applies.
Can I use it if…
Pregnancy, implants, injectables, medicines and skin conditions, answered for every device in the help centre.
Still have a question?
Write to us and a real person on our team will reply. Include your order number if your question is about an order.
- Call+1 (888) 999-1946
- Emailsupport@evenskyn.com
- MessageSend us a message
VIP early accessBlack Friday, answered
40% off sitewide through Cyber Monday, Nov 30, 11:59 PM ET.
How do I get the 40% off?
It's automatic. Add anything to your cart and code BLACK40 goes on for you, so you'll see 40% off every item before you pay. If you ever don't see it, type BLACK40 in the discount box at checkout.
Will the price change before Cyber Monday?
It won't go up. This is our Black Friday price through Cyber Monday, Nov 30 at 11:59 PM ET. The one change we've made is a better one: since November 6, MicroInfuser kits cost less each when you buy 2 or 3. We may also add complimentary extras along the way, like conduction gel or MicroInfuser samples.
Is there a deal on more than one MicroInfuser kit?
Yes. Buy 2 kits and each one costs less than a single kit, and buy 3 or more and each costs less again. Three kits cover about six months of sessions. The saving comes off automatically at checkout, in place of BLACK40, and if your cart has other items too, checkout uses whichever saves you more.
Can I use a different code?
Yes, but only one code works per order, so codes don't stack. If you use another code, it replaces BLACK40, and for almost every order BLACK40 saves you the most.
Do the sets get 40% off too?
Yes. BLACK40 takes 40% off every item, sets included, and our sets still cost less than buying each piece on its own.
What if it isn't right for me?
The usual terms apply to sale orders. Devices come with our 60-day money-back guarantee for US and Canadian residents; return shipping is on you, or we deduct up to $20 if you use our prepaid label. The MicroInfuser kit has a 60-day money-back guarantee on unused treatments. Lumo⁺ keeps its 2-year warranty and our other devices their 1-year warranty.
Is shipping free?
Yes, in the US and Canada.
Every Black Friday price, in one place
Sale dates, prices and terms




