EVENSKYN®

Wir empfehlen zwar die Verwendung unseres speziellen Leitgels für optimale Ergebnisse, Sie können aber auch einfach Wasser verwenden. Da das Lumo ein leistungsstarkes Gerät ist, können Sie Ihr Gesicht nach der gründlichen Reinigung leicht mit Wasser aus einer Sprühflasche besprühen; das Wasser dient dabei als effektiver Leiter. Für einen verstärkten Anti-Aging-Effekt empfehlen wir jedoch ein wasserbasiertes und ölfreies Gel, insbesondere solches mit Inhaltsstoffen wie Hyaluronsäure, Glycerin, Peptiden oder Vitamin C.

Das EvenSkyn Leitgel enthält Aqua (Wasser), Glycerin, Hyaluronsäure, Aminosäuren, Hydroxyethylcellulose, Peptide, Methylparaben und Triethanolamin.

Sie können das Gel nach der Behandlung auf der Haut belassen, um von seinen Vorteilen zu profitieren. Das Gel enthält wertvolle Inhaltsstoffe wie Hyaluronsäure, Aminosäuren, Peptide und Glycerin, die die Anti-Aging-Wirkung verstärken und zu einem gesünderen Hautbild beitragen.

Ja, unser Gel kann mit allen zugelassenen Mikrostrom-, Ultraschall- und Radiofrequenzgeräten verwendet werden, einschließlich Lumo, Phoenix, Venus usw.

You can leave EvenSkyn Conduction Gel on after treatment to enjoy its hydrating and anti-aging benefits, or rinse if you prefer a clean finish.

Why Leave It On (Recommended):

• Hyaluronic Acid: Keeps drawing moisture into skin for hours.
• Collagen Peptides: Continue stimulating collagen production after RF/ultrasound opens skin channels.
• Amino Acids: Support skin repair and barrier recovery post-treatment.
• Glycerin: Seals in hydration, keeps skin moisturized longer.

Post-Treatment Options:

1. Leave On (Best Results):

• Massage in leftover gel
• Apply moisturizer or SPF
• Let gel absorb fully (10–15 minutes)

2. Partial Rinse:

• Wait 10–15 mins
• Rinse with lukewarm water
• Continue with your skincare

3. Full Rinse:

• For users who prefer a bare face
• Rinse immediately after session
• Still delivers core treatment benefits

When You Should Rinse:

• Before applying makeup
• If skin feels sticky
• Prior to applying sunscreen in sun exposure

Layering Other Products:

You can apply serums or moisturizers after the gel absorbs. It won’t block penetration, in fact, it enhances it.

Bottom Line: Leaving the gel on gives extended benefits, but rinsing is fine for comfort or makeup prep. Either way, your skin gains from the treatment.

EvenSkyn Conduction Gel is universally compatible with all EvenSkyn energy-based devices and most non-EvenSkyn RF, EMS, and ultrasound tools.

EvenSkyn Devices:

• Lumo / Lumo+: Requires gel for RF + EMS. Use ~5ml.
• Phoenix Bar: Works without gel but glides better with it (3ml).
• Eclipse: Essential for Lifting/Ultrasound modes (~4ml).
• Cosmo: Optional, but improves glide and serum infusion in Nutrition mode (3ml).
• Venus: Gel is required for safe RF use around delicate eye skin (1–2ml).

Compatible with Non-EvenSkyn Brands:

• NuFACE: Full replacement for NuFACE gel, 3x better value, more skincare benefits.
• Foreo Bear: Works better with EvenSkyn gel (Foreo’s silicone serum can block energy).
• TriPollar STOP, ZIIP, Silk’n Titan, MyoLift: Fully compatible, safe, effective conduction.
• LED-only or mechanical devices (e.g., Cleopatra Mask, PMD): Gel not required, but can be used for comfort.

What Devices Don’t Require Gel:

• LED-only masks
• Dermaplaning tools, jade rollers
• Sonic vibration-only devices

Why EvenSkyn Gel Works:

• Water-based + pH-balanced (5.5–6.5)
• Won’t corrode metal or damage device heads
• Rinses off easily, no sticky residue
• Dermatology-grade conductivity

Bottom Line: One gel for all your energy-based devices, EvenSkyn and beyond. No need to buy multiple brand-specific gels.

For best results, apply EvenSkyn Conduction Gel in a thin, even layer to clean, dry skin immediately before using your device. This ensures smooth glide, optimal energy transfer, and no wasted product.

Application Steps:

1. Cleanse & Dry: Skin must be makeup-free, oil-free, and dry. Skip toner or moisturizers before gel.
2. Dispense Correct Amount:

• Face: 3ml
• Face + neck: 4ml
• Face + neck + décolletage: 5ml
• Eyes (Venus): 1ml

1. Optional Warming: Rub gel between palms for 5 seconds to improve spreadability.
2. Preferred Method – Apply to Skin First:

• Dot gel on major zones (forehead, cheeks, chin, neck)
• Spread evenly using upward strokes
• Ensure full coverage, no dry patches, no dripping

1. Alternate Method – Apply to Device Head: Quicker, but may lead to uneven distribution.

Common Mistakes:

• Applying on damp skin: Reduces conductivity, always dry skin first.
• Using too much: Doesn’t enhance results, just wastes gel.
• Uneven coverage: Leads to dragging or poor device contact.
• Letting gel dry before starting: Start treatment within 1–2 minutes of application.
• Layering other skincare first: Creates a barrier, only apply gel to bare skin.

Pro Tips:

• Long sessions (Lumo 25 min): Divide face into 4 sections, apply and treat one at a time.
• If gel dries mid-treatment: Mist lightly with water to rehydrate instead of adding more gel.
• After treatment: Gently massage leftover gel into skin to enhance absorption of hyaluronic acid and peptides.

Bottom Line: Use the right amount, apply evenly on clean, dry skin, and begin treatment promptly while gel is still wet. Proper technique ensures effective results with every session.

Store EvenSkyn Conduction Gel at room temperature (60–75°F / 15–24°C) with the cap tightly closed. When stored properly, it lasts 12–18 months after opening and 24–36 months unopened.

Proper Storage Tips:

• Store upright in a cool, dry place (bathroom cabinet or vanity drawer).
• Avoid heat, direct sunlight, or cold environments (car, windowsills, freezer).
• Never refrigerate, thickens the gel and impairs usability.
• Always close the cap tightly to prevent drying, contamination, or bacteria buildup.

Best Hygiene Practices:

• Don’t touch the bottle opening or dip fingers into the container.
• Dispense into clean, dry palms or use a sterile spatula.
• Never share the bottle tip, everyone should dispense their own portion.
• Wipe bottle rim after use to prevent crusting.

Shelf Life:

• Unopened: 24–36 months (check batch code on bottom).
• After opening: 12–18 months if stored properly and used hygienically.
• TSA Travel Tip: Transfer up to 50ml into a clean, airtight travel bottle.

Signs It’s Expired:

• Change in color (yellowing), foul odor, separation, visible mold, or unusual texture.
• Skin irritation if previously tolerated well. When in doubt, discard.

Cost-Efficiency:

• 300ml = 60 treatments → lasts 2–8 months depending on use.
• 600ml = 120 treatments → ideal for frequent users or sharing.

Bottom Line: Store EvenSkyn Gel in a cool, dry place, sealed tightly, and avoid extreme temperatures. Use within 12–18 months of opening for maximum safety and performance.

Yes, EvenSkyn Conduction Gel is specifically formulated for sensitive, allergy-prone, and reactive skin types. It’s hypoallergenic, fragrance-free, dye-free, and pH-balanced to match the skin’s natural acidity (5.5–6.5), reducing irritation risk. 

The formula is dermatologically tested, non-comedogenic, and safe for daily use, even on rosacea or eczema-prone skin (during non-flare periods).

Why It's Safe for Sensitive Skin:

• No Fragrance: Free of perfumes, which are common irritants.
• No Dyes/Colors: Transparent gel, eliminating dye-triggered reactions.
• Water-Based: No oils or silicones that clog pores or trap heat.
• No Harsh Alcohols: Preserves moisture without stinging or dryness.
• Minimal Ingredient Formula: Just 8 ingredients, including hyaluronic acid, peptides, amino acids, and glycerin, all naturally skin-compatible.

Preservative Use:

• Methylparaben is the only preservative, used at <0.5%. It's FDA-approved, extremely well-tolerated, and protects the water-based gel from mold and bacteria.
• If you have a known paraben allergy (rare: <1% population), do a patch test first.

Patch Test Instructions:

1. Apply pea-sized gel to inner forearm
2. Wait 24 hours
3. No reaction? Safe to use on face
4. Reaction? Rinse, discontinue, consult a dermatologist

When to Use Caution:

• Active eczema or rosacea flare-ups: Wait until skin calms
• Open wounds or broken skin: Avoid, risk of irritation or infection

What’s NOT in the Gel:

• Fragrance
• Essential oils
• Sulfates
• Phthalates
• Gluten, soy, or nut derivatives

Suitable Skin Conditions:

• Rosacea, eczema (non-flare), acne-prone skin, post-facial or laser (after waiting period)

Bottom Line: EvenSkyn Gel is one of the safest conductive gels available. It contains no known irritants and offers clinical-grade performance with skin-calming, hydrating ingredients, ideal for sensitive or allergy-prone users.

While water, aloe vera, or moisturizers can offer partial conductivity, none of these alternatives match EvenSkyn Conduction Gel when it comes to professional-grade conductivity, treatment comfort, or anti-aging results.

EvenSkyn Conduction Gel is specifically engineered for RF, microcurrent, and ultrasound devices. It delivers optimal signal transmission, perfect glide, and long-lasting moisture. Plus, it includes hyaluronic acid, peptides, amino acids, and glycerin for visible skin benefits. At just ~$0.50 per treatment, it’s also highly cost-effective.

Why Water Doesn’t Work Well:

• Dries Too Fast: Evaporates in 2–3 minutes; interrupts treatments like Lumo’s 25-min session
• No Glide: No viscosity; causes tugging and drag on skin
• Inconsistent Contact: As water evaporates, signal breaks down
• No Skin Benefits: No hydration retention, no firming
• Messy: Drips off forehead/neck, stings eyes

Use water only in emergencies or for ultra-short sessions (<5 mins) with low-powered tools like Phoenix.

Why Aloe Vera Is a Partial Solution:

• Water-based and soothing
• Good for sensitive skin and budget users
• Gets sticky after 10–15 mins
• No peptides, collagen support, or conductivity enhancers
• Quality varies, many brands contain <10% aloe

Use for short treatments or if gel runs out, but it’s not ideal for consistent results.

Why Moisturizer and Creams Don’t Work:

• Most contain oils/silicones that block RF and current
• Not designed to stay on surface (absorbs too quickly)
• Can coat device heads and reduce performance

Exception: Some water-based gel creams (like Neutrogena Hydro Boost) may work for very short ultrasound modes, but they still lack conductivity enhancers.

Bottom Line: For consistent, safe, and effective results, EvenSkyn Conduction Gel is the only product optimized for energy-based skincare devices. Substitutes can compromise your treatment and long-term results.